Choose the profile by curtain load
The compact 2102 is published for sheers and light-to-medium curtains. The larger 4200 is published for light, medium and heavy curtains.
Loading TrackFit...
Independent cornerstone guide
Goelst Curtain Track Installation
Goelst offers aluminium curtain-track profiles for domestic, office, hospitality and care-sector use. Its manual tracks include compact channels for sheers and medium curtains as well as larger profiles for heavier curtain loads.
Brand position
Where Goelst fits in a curtain project
Goelst tracks are used across homes and professional interiors, with several profiles designed for both wall and ceiling installation.
Selected profiles can be forward or reverse bent, making them relevant to bay windows, returns and curved layouts.
The Goelst Flow system provides regularly pleated curtain movement when the compatible profile, gliders and curtain construction are used together.
The correct support spacing depends on the profile, curtain package weight, track shape and the manufacturer's fixing guidance.
Typical applications
Projects where Goelst may be considered
Domestic straight and bay-window tracks
Sheers, lined curtains and selected heavy curtains
Office buildings and meeting spaces
Care homes and healthcare-related interiors
Hotels and professional environments
Flow-style regularly pleated curtains
Selection process
How to choose the right system
Confirm the required bend
A track described as bendable still has minimum radii and tooling requirements. Measure the fixing line and confirm forward or reverse bends before ordering.
Choose wall or ceiling supports
The bracket family changes with the profile and required wall projection. Do not mix supports simply because the profile appears to fit.
Account for the stack position
Goelst recommends additional support where curtains gather and, where possible, before or after curves. The stack can produce a concentrated load at one end of the track.
Product guides
Compare selected Goelst systems
| System | Operation | Fitting | Guide |
|---|---|---|---|
| Goelst 2102 | Hand drawn | Ceiling or wall | Read guide → |
| Goelst 4200 | Hand drawn | Ceiling or wall | Read guide → |
Existing tracks
How to identify the system
- • Photograph the aluminium profile from the end and underside.
- • Record the approximate profile dimensions and colour.
- • Photograph the glider, end stop and ceiling or wall bracket.
- • Check invoices, packaging or workroom documentation for the four-digit profile number.
- • Confirm whether the curtain uses standard gliders or Goelst Flow components.
Installation
Practical fitting checks
- • Mark the final wall or ceiling line after checking projection from handles, radiators and sills.
- • Use the profile-specific bracket system and spacing guidance.
- • Add support near stacking positions and around bends where practical.
- • Keep joins aligned so gliders pass without catching.
- • Where a one-piece pre-bent track is supplied, protect its finished shape during transport and handling.
- • Test every glider through every bend and join before hanging the curtain.
Troubleshooting
Common problems and what they indicate
Gliders catch at a join
Check that the connecting bridge is fully seated, the profiles are aligned and cut ends are clean and square.
The bay track springs away from the intended line
Confirm that the track was formed to the measured fixing route and that supports hold the profile at the required points.
Curtains drag around bends
Check bend radius, glider type, track alignment and curtain load. A bend that is too tight for the profile can prevent smooth travel.
The track sags near the curtain stack
Add or reposition suitable support in line with the manufacturer's fixing guidance and inspect the substrate for movement.
Comparison guidance
When to move up, down or across the range
- • The 2102 is a narrow 15 × 10 mm profile intended for sheers and light-to-medium curtains.
- • The 4200 is a larger 18 × 21 mm profile intended for light through heavy curtains and has the visual presence of a slim pole.
- • Both published systems can be wall or ceiling mounted and can be bent forward or in reverse.
- • Bracket spacing should be selected from the manufacturer's load table rather than using one generic distance for every curtain.
Frequently asked questions
Does TrackFit install Goelst curtain tracks?
TrackFit can independently install suitable manual Goelst systems after confirming the profile number, components, curtain load and site conditions.
Can Goelst tracks be bent for bay windows?
The 2102 and 4200 are both published as forward and reverse bendable. The required radius and final fixing route must be confirmed before forming the track.
What is the difference between Goelst 2102 and 4200?
The 2102 is a compact narrow profile for sheers and light-to-medium curtains. The 4200 is a larger profile published for light through heavy curtains.
Can Goelst tracks be wall mounted?
The 2102 and 4200 both have published wall and ceiling mounting options, using profile-specific supports.
How far apart should Goelst brackets be?
Spacing depends on the profile and curtain package weight. The current Goelst fixing guide or load table should be used.
Independent and product-specific
TrackFit is independent. Product ranges and technical data can change. Confirm the current manufacturer catalogue and exact system before ordering components, cutting tracks or drilling.